Water Damage Restoration
Hot water is a necessity in any home or business, making the water-heater one of the most valuable components of our homes. However, water heaters require proper maintenance, without which they can rust, develop leaks and even burst. If you’ve recently experienced any type of water damage due to a water heater leak or burst, call G-Tech Restoration for a free professional estimate and prompt flood cleanup services.
The importance of immediate action
Water is extremely destructive. In fact, excess exposure to water can cause the rapid deterioration of almost every component of the indoor environment. The severity of such a problem can increase due to exposure to unsanitary water and delayed clean-up services.
Water heater floods are no joke, often flooding an entire basement. Beyond water flooding your property, several other dangers exist that can have a negative impact on your health and lead to costly repairs. Even slow leaks can lead to higher utility bills due to the additional amount of water wasted and the continual need to heat the water that’s added to the tank.
What to do to prevent further damage
Water-heater leaks can lead to increased health risks and serious water damage, hence the importance of immediate attention. In case of such a leak, you should try to minimize the extent of the leak before you contact a plumber or water damage restoration expert. The following steps can help address the problem:
Turn off the power: Turn the circuit breaker off if you have an electric heater and check the top of the thermostat for a dial if you have a gas-operated heater. Unplug any other electrical appliance located in the affected area to protect your appliances against the potentially adverse effects of a leak and minimize the risk of electrocution.
Turn off the water supply: This step is extremely important. Turn the heater’s water valve clockwise until it stops. If you are unable to, shut off your home’s water supply.
Drain the water-heater: Check the bottom of the water tank to locate the drain valve and attach a hose. Make sure you can drain dirty water safely from the end of the hose before you open the drain valve. Use a screwdriver if necessary.
Open the pressure relief valve: Flipping the valve helps prevent a vacuum from forming as the water drains.
Dry the floors: Remove soaked carpets and other moveable items from the affected area. While you’re likely to dry out some of the items, the same might not apply to carpets. Use a wet-dry shop vacuum, mop, or towels to remove excess water from the soaked floors and walls. Dry them as soon as possible, using a desiccant if necessary.
Circulate air and dehumidify: You can help limit the extent of water damage and make the environment unfavorable for mold growth by speeding up the drying process.
While taking immediate action is important, large leaks and those that have gone unnoticed for more than a day will require expert attention.
The importance of using a restoration company
In case of a flooded home, you’ll want to begin the remediation process immediately to help prevent mold growth and minimize potential damages. Calling in the experts is, therefore, advisable should flood damage occur. As a top-rated restoration company on Long Island, our expertise in emergency disaster management has proven extremely helpful in such situations. Here’s why you should consider our services:
1. Quick response and remediation
In case of flooding, a quick response is crucial in minimizing the extent of water damage. Given time, water can seep further into your home’s structures and cause a lot more damage. On the other hand, it can take less than 24 hours for bacteria and mold to begin growing.
At G-Tech Restoration, we guarantee a quick response and prompt mitigation services. Our 24/7 emergency service system allows you to call for professional assistance whenever needed. With response teams always on standby, you won’t have to wait until morning to begin the remediation process if flooding occurs during the night.
Though we are based in Long Island, all our response teams are made up of well-trained, experienced technicians equipped with special equipment. Compared to the average homeowner, we will accomplish the restoration task within a much shorter time and achieve much better outcomes.
2. Thorough inspection
The initial inspection and evaluation process is perhaps the most vital aspect of water damage restoration in both Suffolk County and Nassau County. It’s not easy for homeowners to determine the degree of water damage, hence the need for proper, professional inspection. Our water damage technicians will use special equipment to locate the water and establish the extent of the damage. We must first determine the category of water damage and the specific type of water in your home before deciding the best course of action. Apart from expert advice concerning water damage restoration, Suffolk County and Nassau County residents can also benefit from free estimates.
3. Water extraction and drying
Water should be removed and dried from your flooded home as quickly as possible to reduce the likelihood of mold growth. While water extraction is best done with the help of professional-grade pumps and vacuums, any remaining moisture should be dried out using heavy-duty fans and dehumidifiers. The removal of moisture is important because it further discourages mold growth.
4. Safe mold remediation
When it comes to preventing mold growth, the window of opportunity cannot be measured in days or weeks but in hours. As such, you’ll want access to the quick mold remediation services provided by a licensed and insured company like G-Tech Restoration. Like inhabiting the affected house, it’s dangerous to try a DIY remediation process since several varieties of mold are toxic. With professional assistance, on the other hand, you can be assured of safe mold remediation and property protection from future fungal growth.
5. Cleanup and repair
Apart from the potential health risks, water damage can lead to significant financial burdens and lifestyle interruptions if not dealt with quickly and properly. Fortunately, professional water damage restoration is based on science. This process calls for the evaluation of three factors in order to determine the best solution between restoration and replacement. The factors considered are:
• The degree of contamination
• The extent of the damage
• The cost of replacement vs. the cost of restoration
Apart from your floors, insulation and drywall, water damage can affect the studs too. Fortunately, replacements and repairs are part of water damage restoration services. If necessary, our technicians will replace any affected materials and features to help restore your home to its original condition.
6. Filing insurance claims
Homeowner insurance companies are notorious for providing unsatisfactory or misleading information through their customer service departments, making it easier for you to jeopardize your claim unwittingly. As an established flood damage restoration company based in Long Island, G-Tech Restoration has dealt with a multitude of homeowner’s insurance providers. We know the ins and outs of insurance policies and forms. As such, we can help you document the losses incurred from water damage. We can also help you provide your insurance company with proof of water damage in case of a dispute. Hiring our services can, therefore, increase your chances of getting a fair settlement from your insurer.
7. Reduced costs and losses
Professional water damage restoration services can mean lower overall costs and damage-related losses, especially if sought immediately. This is because the mitigation process takes a much shorter time, reducing the levels of damage. In fact, timely and appropriate actions can mean the difference between restoration and total loss.
Although water heaters are susceptible to failure, proper maintenance can help keep common issues from arising. Here’s how:
Check your unit’s age: Regardless of the type or model, old water heaters are likely to malfunction. The risk of a sudden burst or a slow leak increases the more your unit approaches its life expectancy.
Perform regular cleaning: Regular maintenance should include the removal of sediment, which you can achieve by flushing the tank twice a year.
Schedule annual inspections: Your plumbing lines and the heater’s shut-off valve should be inspected by a professional once every year. Wet or loose joints, rust and broken valves are signs of imminent damage.
Remember, prompt and effective intervention can reduce the adverse effects of water damage significantly. Secondly, although the damage might look severe, professional cleanup and restoration services can produce astonishing results.